How to remove Color Explosion black paper coating or Neon Explosion colored coated paper from finished wood (paneling, paint, stain, varnish)

Use furniture polish according to the directions on the container. Wipe with a soft cloth. If stain remains, repeat procedure.

ALTERNATIVE SUGGESTION
Use Mr. Clean Magic Erase according to the manufacturers' directions or make an OxiClean paste and apply to the stained area. Let rest for 15 minutes. Using a soft cloth or sponge moistened with water, remove paste. If stain remains, re-apply the OxiClean paste letting it rest until the paste is completely dry.  The use the soft cloth or sponge moistened with water to remove the dried paste

Please Note:

The suggestions for removing stains have been compiled as a service to our consumers. We are unable to guarantee or be responsible for the results obtained by these procedures. You may also wish to consult your local cleaner for further recommendations.

Before attempting the stain removal method, test each procedure on an inconspicuous area of the material or surface to be cleaned. Please be advised these stain removal methods involve hazardous products and are intended only for adult use. Crayola does not recommend children attempt these procedures.

In many procedures, specific brands of products are recommended. These are brands that performed most effectively in our laboratory. Always check individual containers for recommended procedures and warnings. Competitive brand products may work equally well.

For additional assistance, contact us toll-free at 800-272-9652 weekdays between 9 AM and 4 PM Eastern Time.