How to remove Outdoor Colorfoam from finished wood (paneling, paint, stain, varnish)

For outdoor wood surface: Rinse the stained surface with water from a garden hose. If stain remains, apply All Purpose Cleaner or Krud Kutter and work the area with a scrub brush in a circular motion. Rinse with water. Repeat as needed. Special Note: Residual color will disappear with exposure to outdoor weather.

For indoor wood surface: Wipe the stained surface with a wet sponge. If stain remains, apply liquid dish soap to the wet sponge and wash the surface. If stain persists, spray the area with All Purpose Cleaner or Krud Kutter and wipe off with a paper towel. Repeat as needed.

Please Note:

The suggestions for removing stains have been compiled as a service to our consumers. We are unable to guarantee or be responsible for the results obtained by these procedures. You may also wish to consult your local cleaner for further recommendations.

Before attempting the stain removal method, test each procedure on an inconspicuous area of the material or surface to be cleaned. Please be advised these stain removal methods involve hazardous products and are intended only for adult use. Crayola does not recommend children attempt these procedures.

In many procedures, specific brands of products are recommended. These are brands that performed most effectively in our laboratory. Always check individual containers for recommended procedures and warnings. Competitive brand products may work equally well.

For additional assistance, contact us toll-free at 800-272-9652 weekdays between 9 AM and 4 PM Eastern Time.