Wipe all stains with a whiteboard cleaner according to the directions on the container.  If any stain remains, apply all purpose cleaner according to the directions on the container.  If the stain persists, saturate a cotton ball with rubbing alcohol, blot the remaining stain and rinse.  Or, you may use Clorox Clean-Up (spray bottle) according to the directions on the container.  You may also try the following:  Use another color dry-erase marker over the stain and wipe off while ink is still wet.  Sometimes, using another color marker over the color, lifts the under color when erased.

ADDITIONAL NOTES:  If whiteboard surface is porcelain, the dry-erase markers should erase easily.  If the whiteboard surface is laminated, use the suggestion provided.  NOT RECOMMENDED:  Soft Scrub or any abrasive cleaner.

1. Before laundering, rinse the stain from fabric with hot water until no more color can be removed.

2. Machine wash in hot water with laundry detergent for about 12 minutes (heavy soil cycle). Do not use prewash or chlorine bleach. Do not put the garment in the dryer.

3. Soak in a solution of Oxi Clean or Clorox 2® according to the instructions on the container for one hour. Let the garment air dry.

4. Repeat laundering should remove any residual stains. Do not heat-dry between washings.

Ink that has soaked through multiple layers of fabric (like quilts or comforters), or left on the fabric for longer periods before washing, may require additional cleaning and supplies.

Optional cleaning materials you may need:
• Amodex® Spot Remover
• Amodex® Stain Swipe Wipes

We suggest:

1. First, test Amodex Spot Remover on an inside seam or hidden area.

2. Apply Amodex Spot Remover to the stain and allow it to sit for about 10 minutes.

3. Gently scrub the area using the Amodex Stain Swipe Wipe or a soft brush.

4. Rinse with water, and repeat as needed to remove as much ink as possible.

5. Lastly, machine wash according to the instructions above or hand wash the fabric using laundry detergent.

Rinse stain from the fabric with cold water until no more color is being removed. Place fabric on paper towels and saturate with rubbing alcohol using a cotton ball to blot the stain. Replace the paper towels as often as needed. Wash in hot water with laundry detergent and bleach for colored clothing and rinse in warm water.

Wipe all stains with a whiteboard cleaner according to the directions on the container.  If any stain remains, apply all purpose cleaner according to the directions on the container.  If the stain persists, saturate a cotton ball with rubbing alcohol; blot the remaining stain and rinse.  Or, you may use Clorox Clean-Up Cleaner (spray bottle) according to the directions on the container.  You may also try the following: Use another color dry-erase marker over the stain and wipe off while ink is still wet.  Sometimes, using another color marker over the color, lifts the under color when erase. 

ADDITIONAL NOTES: If whiteboard surface is porcelain, the dry-erase marker should erase easily.  If the whiteboard surface is laminate, use the suggestion provided.  NOT RECOMMENDED: Soft Scrub or any abrasive cleaner.

1. Before laundering, rinse the stain from fabric with hot water until no more color can be removed.

2. Wash in hot water with laundry detergent for about 12 minutes (heavy soil cycle). Do not put the garment in the dryer.

3. Soak in a solution of Oxi Clean or Clorox 2® according to the instructions on the container for one hour. Let the garment air dry.

4. Repeat laundering should remove any residual stains. Do not heat-dry between washings.