Presoak the stained garment using either OxiClean powder or laundry detergent. Fill a bucket with two (2) gallons of water, as hot as possible for the garment and use one (1) scoop of laundry detergent or OxiClean powder. Soak for 30 minutes or longer. The longer you soak, the better your results. Wash as usual. Air dry. If the stain persists, presoak again with additional amount of laundry detergent and hotter water.

For best results, treat the stain immediately. Glow Fusion ink will stain many porous surfaces including clothing, and cleaning may only partially alleviate the stain.

1. Rub Fels-Napha laundry bar directly into the stain, according to packaging directions.

2. After pretreating the stain with the Fels-Naptha laundry bar, rinse the fabric with warm water.

3. Machine wash in hot water with laundry detergent.

4. Repeat laundering may be needed. Do not heat-dry between washing.

Rinse stain from the fabric with cold water until no more color is being removed. Place fabric on paper towels and saturate with rubbing alcohol using a cotton ball to blot the stain. Replace the paper towels as often as needed. Wash in hot water with laundry detergent and bleach for colored clothing and rinse in warm water.

1. Blot the stain with a dry paper towel until no more color can be removed.

2. Use Resolve Carpet Cleaner, Spot Shot Carpet Cleaner or Woolite® Oxy Deep Carpet Cleaner according to the directions on the container.

3. Blot the area with a paper towel, sponge or soft colorfast cloth. Continue blotting until the stain is removed. Be careful not to spread the stain.

4. Vacuum the area when dry.

5. If the stain remains, repeat steps 2-4.

1. Machine wash promptly in cold or hot wash cycle with laundry detergent.

2. Do not use prewash or chlorine bleach.

3. Repeat laundering should remove any residual stains. Do not heat-dry between washings.

Ink that has soaked through multiple layers of fabric (like quilts or comforters), or left on the fabric for longer periods before washing, may require additional cleaning and supplies.

Optional cleaning materials you may need:
• Amodex® Spot Remover
• Amodex® Stain Swipe Wipes

We suggest:
1. First, test Amodex Spot Remover on an inside seam or hidden area.

2. Apply Amodex Spot Remover to the stain and allow it to sit for about 10 minutes.

3. Gently scrub the area using the Amodex Stain Swipe Wipe or a soft brush.

4. Rinse with water, and repeat as needed to remove as much ink as possible.

5. Lastly, machine wash according to the instructions above or hand wash the fabric using laundry detergent.