Wipe excess slick stix from leather surface. Apply Leather Magic leather cleaner to the surface according to the directions on the container. If stain remains, repeat procedure. If stain persists, apply Crayon-A-Gone Plus to the stain according to the directions and advisements on the container. If stain is removed, use Leather Magic leather conditioner according to the directions on the container. SPECIAL PRECAUTION: Before attempting the stain removal, test each procedure on an inconspicuous area of the surface to be cleaned. Where-to-Buy: Leather Magic cleaner and conditioner/Call-800-232-4092 or visit www.leathermagic.com. Crayon-A-Gone Plus is available on line at www.officedepot.com.

Use Kaboom Ultra soft cream cleanser per the instructions on package. Optional suggestion would be to make a paste by mixing Oxi Clean powder with water. Apply the paste to the stained area and let rest for 10 to 15 minutes. Use a sponge to rinse with water. Repeat as needed. SPECIAL PRECAUTION: Re-grouting may be necessary.

Use cleaning product according to manufacturer's directions on package. Repeat as needed.

FOR STAINLESS STEEL APPLIANCES - Use any stainless steel cleaning product per the manufacturer’s direction. Repeat as needed

Using a blotting motion, remove as much of the stain as possible with a dry paper towel. Apply any of the above carpet cleaning products according to directions on packaging. Repeat as necessary until stain is removed. SPECIAL PRECAUTION: Do not leave Spot Shot on carpet for more than 8 hours. Check after 4 hours.

Wipe all stains with a whiteboard cleaner according to the directions on the container.  If any stain remains, apply all purpose cleaner according to the directions on the container.  If the stain persists, saturate a cotton ball with rubbing alcohol; blot the remaining stain and rinse.  Or, you may use Clorox Clean-Up Cleaner (spray bottle) according to the directions on the container.  You may also try the following: Use another color dry-erase marker over the stain and wipe off while ink is still wet.  Sometimes, using another color marker over the color, lifts the under color when erase. 

ADDITIONAL NOTES: If whiteboard surface is porcelain, the dry-erase marker should erase easily.  If the whiteboard surface is laminate, use the suggestion provided.  NOT RECOMMENDED: Soft Scrub or any abrasive cleaner.