Finished wood and wood surfaces: If you have a Color Wonder stain on wood, please call 1-800-CRAYOLA for removal assistance.

Brush and rinse as much of the watercolor from the surface as possible. Apply Soft Scrub with a damp sponge and rub in a circular motion toward the center of the stain, rinse and dry. If any stain remains, apply nail polish remover to a cotton ball, blot stain and rinse. Repeat if necessary.Special PrecautionsDo not use nail polish remover near an open flame.

Rub away any dried paint with a soft cloth. Remove wet paint or any remaining stain with a damp sponge. If stain still remains, apply Soft Scrub with a soft cloth. Rinse.

Clean-up stains as soon as possible, as wet paint that has not yet cured will be easier to remove.

Wet Paint:

1. Using paper towels, wipe up as much paint as possible.

2. Make a mixture of dish soap and warm water. Using a sponge or cloth, apply the soapy water to the area and use a circular motion. Continue scrubbing and rinsing the cloth or sponge until no more colorant can be removed.

3. If the stain remains, spray a mild degreaser, such as Formula 409, on the affected area. Let it sit for a few minutes, then wipe the area with a wet soapy cloth or sponge and repeat, as needed.

Dry Paint:

1. Using a dull knife or metal spoon, scrape up any excess paint.

2. Saturate the remaining paint with a solution of warm water and dish soap.

3. Use a sponge or cloth, and rub the area in a circular motion to help lift the paint. The warm, soapy water will help life the paint.

4. If the stain remains, spray a mild degreaser, such as Formula 409, on the affected area. Let it sit for a few minutes, then wipe the area with a wet soapy cloth or sponge and repeat, as needed.

Scrape or brush off excess dry or wet clay with a plastic paint scraper or soft bristle brush. Spray area with water and continue to wipe clean with paper towels. If stain or white residue remains, repeat procedure.