Color Wonder Ink su tasti di pianoforte non avorio e vero avorio

Apply liquid dish soap and warm water to a sponge. Wipe the area clean. Rinse with water and allow to air dry. Repeat procedure if stain is not removed.

1. Sponge stained area with water.  2. Apply wet spotter solution and a few drops of ammonia and let stand as long as any stain is being removed. Press stain every 5 minutes with clean absorbent material. Keep moist with wet spotter and ammonia.  3. Flush with water.  4. Apply wet spotter and a few drops of vinegar. Let stand as long as any stain is being removed. Press stain every 5 minutes with clean absorbent material. Keep moist with wet spotter and vinegar.  5. Flush with water.  6. Apply alcohol to stain and cover with a pad of absorbent materials dampened with alcohol. Let stand as long as any stain is being removed. Change pad as it picks up stain. Press pad firmly onto the stain each time you check it. Keep stain and pad moist with alcohol.  7. Flush with water.  8. If any stain remains, use chlorine bleach as, directed in step 9. Chlorine bleach should not be used on certain fabrics. Test an inconspicuous area of fabric to be sure it will not be discolored. Use a solution of 1 teaspoon bleach to 1 tablespoon water. Apply with a dropper. Do not allow this solution to remain on the fabric more than 2 minutes. When the stain is removed, or after 2 minutes, flush with water onto clean absorbent material. Apply 1 teaspoon vinegar and again flush with water. Be sure that all bleach is removed.

1. Sponge stained area with water.2. Apply wet spotter solution and a few drops of vinegar. Let stand 30 minutes or more. Blot every 5 minutes with clean absorbent material. Add wet spotter and vinegar as needed to keep stain moist.3. Flush with water. Allow to dry.4. Apply alcohol to stain and cover with a pad of absorbent material dampened with alcohol. Let stand as long as any stain is being removed. Change pad as it picks up stain. Press pad firmly onto the stain each time and check.5. Flush with alcohol. Allow to dry.6. Sponge with water.7. Apply wet spotter and a few drops of ammonia. Let stand at least 30 minutes. Blot with clean absorbent material every 5 minutes. Add wet spotter and ammonia as needed to keep stain moist.8. Flush with water. Allow to dry.9. If any stain remains, use chlorine bleach as directed in Step 10.10. Chlorine bleach should not be used on certain fabrics. Test an inconspicuous area of fabric to be sure it will not be discolored. Use a solution of 1 teaspoon bleach to 1 tablespoon water. Apply with a dropper. Do not allow this solution to remain on the fabric more than 2 minutes. When the stain is removed, or after 2 minutes, flush with water onto clean absorbent material. Apply 1 teaspoon vinegar and again flush with water. Be sure that all bleach is removed.

Gently scrape with a dull knife and blot with a paper towel, removing as much colored pencil as possible.  Be careful not to cause additional damage to the fabric.  Consult a professional dry cleaner.

Apply Soft Scrub® with bleach to a soft cloth and wipe the stain. After stain is removed, wipe the surface with a damp cloth to remove any residue.

Special Notes:

• The stain may not be removable from flat paint using the above products. You may need to lightly sand the stained area to remove all color and then repaint.
• On untreated wood, use very fine sandpaper. Sand gently until color is gone.