How to remove Gel FX Markers/Light Designer Markers from porous surfaces

Apply Soft Scrub with bleach to a soft cloth and wipe the stain. After stain is removed, wipe the surface with a damp cloth to remove any residue.

Special Notes:
  • The stain may not be removable from flat paint with the above products. You may need to lightly sand the stained area to remove all color and then repaint.
  • Use very fine sandpaper on untreated wood, sand gently until color is gone.
  • On grout use Soft Scrub with bleach to clean the stain.

Please Note:

The suggestions for removing stains have been compiled as a service to our consumers. We are unable to guarantee or be responsible for the results obtained by these procedures. You may also wish to consult your local cleaner for further recommendations.

Before attempting the stain removal method, test each procedure on an inconspicuous area of the material or surface to be cleaned. Please be advised these stain removal methods involve hazardous products and are intended only for adult use. Crayola does not recommend children attempt these procedures.

In many procedures, specific brands of products are recommended. These are brands that performed most effectively in our laboratory. Always check individual containers for recommended procedures and warnings. Competitive brand products may work equally well.

For additional assistance, contact us toll-free at 800-272-9652 weekdays between 9 AM and 4 PM Eastern Time.