Australia
Belgium
Canada
China
Italy
Mexico
Netherlands
UK
France
Japan
Everything you need to unleash kids imaginations.
Use according to the directions on the container. Repeat if necessary.
Use carpet cleaner per the manufacturer’s direction. Repeat as needed.
Wipe off excess stain with a dry paper towel or soft cloth. Apply a solution of dish soap mixed with warm water and scrub with a brush in a circular motion. Allow the area to dry. Apply a solution of OxiClean powder mixed with warm water to the stain and brush in a circular motion and rinse. Repeat as necessary.
Wipe the stain with a dry paper towel or soft cloth. If stain remains, spray All Purpose cleaner on the stained surface and wipe with paper towel. Repeat as necessary.
Use Pour ‘N Restore per the manufacturer’s direction. Alternative Method: Spray the area with an all purpose cleaner and use a scrub brush to work over the stain. Rinse with water. Apply liquid dish soap or OxiClean cleaner using a scrub brush to work the area. Rinse with water. Repeat as needed. NOTES: Do not use all the cleaning products together at one time.
Wipe the stain with a dry paper towel or soft cloth. Use carpet cleaner on the stained surface according to package directions. Repeat as necessary.
The marker ink is easily removed from non-porous surfaces. In the case of marble, wood paneling and wallpaper, if the surface is non-porous, the marker ink will be removed by allowing the marker ink to dry, then rub off with fingers. If the marble has cracks, the marker ink may not be easily removed. Porous or textured wallpaper, wood paneling or grout may trap some of the marker ink and it may not be easily removed. Recommend using a soft or wire brush to try to remove the film. There is no chemical treatment to remove the film.
Allow the marker ink to dry. Rub off with fingers.
Spray the surface with all purpose cleaner and wipe the area with paper towels or a soft cloth. Repeat as needed.
Use Kaboom or Soft Scrub per the manufacturer’s direction. Repeat as needed.
Mix liquid dish soap and water together and dampen a pad of paper towels. Apply the moist towels over the stained area and let rest 2 minutes. Gently rub and wipe the surface with the paper towel. Allow to dry. Repeat as needed. May leave a permanent stain.
Use water, glass cleaner, all purpose cleaner or liquid dish soap mixed with water to wash the surface. After washing, the surface should be wiped with a dry paper towel to remove chalk-like residue. FOR STAINLESS STEEL APPLIANCES - Use any stainless steel cleaning product per the manufacturer’s direction. Repeat as needed.
Use very fine sandpaper, sand gently until color is gone.
Please Note:
The suggestions for removing stains have been compiled as a service to our consumers. We are unable to guarantee or be responsible for the results obtained by these procedures. You may also wish to consult your local cleaner for further recommendations.
Before attempting the stain removal method, test each procedure on an inconspicuous area of the material or surface to be cleaned. Please be advised these stain removal methods involve hazardous products and are intended only for adult use. Crayola does not recommend children attempt these procedures.
In many procedures, specific brands of products are recommended. These are brands that performed most effectively in our laboratory. Always check individual containers for recommended procedures and warnings. Competitive brand products may work equally well.
For additional assistance, contact us toll-free at 800-272-9652 weekdays between 9 AM and 4 PM Eastern Time.
Australia